3 Ways to Prevent Mold Growth in Your Commercial Building
Prevent Mold Growth In Your Commercial Building
Mold problems are common in commercial buildings, so if you haven’t yet experienced one in your Weston, FL, facility, then chances are you will at some point in the future. There are, however, steps that you can take to make this problem less likely to occur. It is usually easier to prevent the growth of mold than it is to remove it once it has spread, so keep these tips in mind.
1. Clean Regularly
One of the best things that you can do to prevent mold from spreading is to regularly clean the building. Scrub down hard surfaces, particularly those that often come in contact with water such as sinks and showers. Regularly change air duct filters. Carpet cleaning with a HEPA vacuum will help as well since spores can easily gather in porous materials.
2. Limit Moisture Levels
Along with keeping everything clean, you will want to make sure the moisture levels in the building are not too high. This fungus needs water to grow and even just a small amount can contribute to the growth of mold spores. There are several ways that you can do this, such as opening windows to allow ventilation and using a dehumidifier to remove moisture from the air. You should also be sure to have any leaks repaired as soon as you notice them.
3. Use an Air Filter
Because you cannot see its spores, mold can travel through the air without your knowledge. If it has begun to grow in one area, it can move through the structure in this way until it becomes a large problem. The HEPA filters that you want for carpet cleaning work brilliantly in air purifiers as well to remove these spores from the air and keep them from contaminating your building.
While preventative measures such as carpet cleaning and limiting moisture can work well, you may sometimes find that they haven’t worked well enough. If you find or suspect mold growth in your building, contact a mold remediation specialist to have an inspection and any necessary cleanup done.